Procolored UV DTF Transfer Clear AB Film - fit for A3 UV DTF Printer
$130.00
The earlier Type-A film, which was based on white paper, has been upgraded to a transparent version to enhance its appearance, while retaining its fundamental features.
Feature
# Use UV printing method to print directly to the B film;
# 2 Epson piezoelectric nozzles can achieve more vibrant colors and lifelike printing: color ink+white ink+varnish+glue;
# Glossy surface and three-dimensional feeling, support UV DTF transfers with good hand feeling;
# UV resistance, scrubbing resistance, solvent resistance, long-term storage;
# Print and dry faster, can be produced in small batches. saving you time and money;
# Suitable for most materials and UV DTF printers, not limited by material and shape, it can paste to any hard surface.
Size
Film A: A3 (50m roll)
Film B: A3 (50m roll)
|
Size
|
film A: A3 (50m roll)
film B: A3 (50m roll)
|
|
Applicable ink
|
UV ink
|
|
Use conditions
|
19-28℃; humidity 40-60%
|
|
Storage conditions
|
18-38℃
|
|
Application
|
Can apply to the most hard surface like: glass material, wood material, resin material, plastic material, ceramic material, and hardware material,etc.
|
APPLICATIONS
Usage of A/B Films
The type-A film is used as base film for printing and typ-B film is used as backing film to back up the printed stickers.
The A/B transfer films are used in pair on the UV DTF printer.
Loading Type-A Film
Pay attention to the direction of the film leading edge. Peel off the protective film from the base film and pass it under the heating roller.
Loading Type-B Film
The film will also go under the heating roller and combine with the type-A film.
Binding Films
There is a sticky adhesive layer on the base film, watch out not to stick it with any parts of the printer.
Check Alignment
The base film should be laying flat on the printing platform and align with the backing film.
Print Stickers
UV lights will solidify the inks effectively. The printer can produce high-resolution and durable decals.
Apply Stickers
Release the sticker from the base film and make it go with the backing film. Stick it on a flat surfaces.
